Construction Fasteners, PPE & Industrial Supplies | South Coast Fasteners

South Coast Fasteners is the single-source supplier for commercial construction fasteners, PPE, and industrial supplies across structural steel erection and heavy timber framing. Headquartered in Anaheim, California, with 24 USA distribution centers and will-call available at checkout for local pickup, we deliver the structural load capabilities, fast turnaround, and product breadth that general contractors, structural fabricators, and subcontractors require on active job sites. Shop all commercial construction products online at South Coast Fasteners and reach out for help making an online purchase or for any questions.

Fasteners for the Construction Industry

South Coast Fasteners stocks the complete range of fasteners the Construction industry demands, from standard hardware to specialty grades engineered for demanding applications.

Structural Bolts and Hex Bolts Grade 5 and Grade 8

Structural bolts engineered to ASTM A325 and A490 specifications deliver the tensile strength and shear capacity required for load-bearing connections in steel building frames, bridge construction, and heavy structural applications. Grade 5 structural bolts provide 120 ksi minimum tensile strength for general structural connections, while Grade 8 bolts offer 150 ksi tensile strength for high-load structural applications and retrofit work. Available in 0.5-inch through 2-inch diameters with coarse or fine threading, structural bolts are matched with structural hex nuts and structural washers to create complete, certified assembly kits. Premium markings and dimensional control ensure compliance with building codes and inspection requirements.

Lag Bolts and Timber Bolts

Lag bolts and timber bolts secure heavy timber framing, beam connections, and post-to-foundation assemblies in residential and commercial construction. Lag bolts with integral hex heads are torqued directly into timber grain, creating strong mechanical connections that resist shear and pulling loads in floor joist systems and rafter tie-downs. Timber bolts with separate nuts allow tightening and adjustment, making them essential for structural timber construction, covered bridge restoration, and post-and-beam fabrication. Both styles are available in carbon steel and stainless steel, with diameter ranges from 0.5-inch through 1.5-inch to match design loads.

Carriage Bolts and Anchor Bolts

Carriage bolts provide attractive, flush fastening for exterior trim, deck construction, and visible structural applications where the rounded head presentation is specified. The square neck prevents rotation during tightening, eliminating fastener spinning that would compromise connection integrity. Anchor bolts embed in concrete footings and foundation stems, securing structural steel columns, concrete posts, and mechanical equipment to the building base with precision alignment. Available in sizes up to 2-inch diameter with epoxy coating or galvanizing for permanent corrosion protection in foundation and outdoor applications.

Structural Hex Nuts and Heavy Hex Nuts

Structural hex nuts match structural bolt specifications and are engineered to ASTM A194 Grade 2H and 2HM standards, delivering load-bearing capacity equal to mating bolts. Heavy hex nuts provide additional bearing surface and thickness, accommodating washer sets and distributing loads across larger surface areas in structural connections. Both nut styles are available with nylon insert locking features for vibration resistance in multi-story frame construction, seismic applications, and high-wind exposures. Precisely machined threads ensure repeatable torque values and predictable clamp loads in critical structural assemblies.

Nylon Insert Locknuts and All Metal Locknuts

Nylon insert locknuts provide vibration-resistant fastening in steel connections, curtain wall assemblies, and mechanical systems where structural bolts must maintain consistent clamp force through vibration and dynamic loading. All metal locknuts offer high-temperature performance for applications exceeding 250 degrees F, including roof-mounted mechanical equipment and industrial exhaust systems. Both locknut styles are available in structural sizes (up to 2-inch diameter) and are matched with structural bolts and washers for complete connection assemblies that meet building codes and inspection standards.

Structural Washers and Thru Hardened Flat Washers

Structural washers distribute clamping loads in bolted connections and prevent fastener embedding in structural steel, cast iron, and composite materials. ASTM F436 structural washers are hardened and tempered to match structural bolt specifications, maintaining load distribution under vibration and thermal cycling in high-rise construction. Thru hardened flat washers extend pressure across larger surface areas, accommodating surface irregularities in mill scale, paint, and surface treatments. Both styles are available in diameters matching structural bolts and nuts, with circular markings that aid inspection and verify proper fastener sizing.

Wedge Anchors and Sleeve Anchors

Wedge anchors and sleeve anchors provide permanent fastening in concrete foundations, structural elements, and retrofit applications where drilling is required after concrete placement. Wedge anchors develop pull-out strength through mechanical expansion of the anchor body, creating strong bonds in solid concrete and grout-filled applications. Sleeve anchors offer adjustable expansion depth, making them suitable for concrete thicknesses, partially drilled holes, and applications requiring flexibility in installation. Both anchor styles are available in sizes 0.25-inch through 1-inch diameter with load ratings certified to post-install inspection standards.

Drop-In Anchors and Concrete Screw Anchors

Drop-in anchors provide reusable fastening points in concrete floors, ceilings, and structural elements, allowing repeat installation and removal of equipment without anchor replacement. Concrete screw anchors combine speed and reliability by threading directly into concrete without expansion or setting time, making them ideal for drywall backing, interior fastening, and retrofit applications. Both anchor types are available in metric and imperial sizes with load ratings matched to concrete strength classifications (2,000 psi through 4,000 psi). Performance data is certified to ACI and ICBO standards for structural design compliance.

Expansion Shield Anchors

Expansion shield anchors provide permanent fastening in concrete, cinder block, and masonry materials using a threaded stud that expands a plastic or metal shield within the drilled hole. The conical expansion geometry locks the anchor in place without tools or installation complexity, making them ideal for field applications and quick equipment mounting. Available in sizes 0.25-inch through 0.75-inch diameter with plastic shields for standard loads and zinc-plated metal shields for heavy-duty applications. These anchors are specified in building codes for non-structural fastening and are widely used in commercial construction.

Threaded Rods

Threaded rods provide continuous thread engagement for suspended ceiling systems, pipe hangers, equipment mounts, and structural studs where extended fastening length is required. Continuous threading eliminates the frustration of partial threads and allows exact cut-to-length customization on the job site using standard cutting tools. Available in lengths up to 12 feet with diameters from 0.25-inch through 1-inch and material grades including standard steel, stainless steel, and galvanized finishes. Tensile ratings and cutting guides ensure proper installation in load-bearing applications and compliance with code-required safety factors.

USA Strut Channel and Strut Channel Fittings

USA strut channel (also known as slotted channel or U-channel) provides modular fastening infrastructure for mechanical equipment mounting, cable management systems, and structural bracing. The continuous longitudinal slots accept nuts, bolts, and specialized fittings without drilling, allowing field adjustments and relocations without tool complexity. Channel sizes (1.625-inch, 2.0-inch, 2.5-inch heights) accommodate standard structural bolts and quick-release fastening hardware. Complete fitting packages including channel nuts, coupling plates, and corner braces enable engineers to design systems that adapt to installation challenges and accommodate future modifications.

Strong-Point® Products for Construction

South Coast Fasteners' exclusive Strong-Point® screw line is engineered for the specific demands of Construction applications.

Strong-Point Self-Drilling Screws

Strong-Point Self-Drilling Screws revolutionize construction fastening by eliminating pre-drilling requirements on light-gauge steel framing, metal studs, and composite decking applications. The hardened drill point penetrates multiple material layers including plywood, oriented-strand board, and galvanized steel framing without generating scrap curl or material deformation. Built-in flute geometry reduces driving torque, enabling faster installation on commercial roof deck assembly, metal building component fastening, and curtain wall anchor applications. Meets building code requirements for structural integrity while reducing labor costs by 30 to 40 percent compared to traditional drilling and fastening processes.

Strong-Point Concrete Screws

Strong-Point Concrete Screws deliver code-compliant fastening into concrete, masonry, and cinder block without expansion anchors, reducing installation time and material costs in structural retrofit and foundation anchoring applications. Specialized flute geometry creates controlled threads in hardened concrete while minimizing micro-cracking and splitting common with traditional fastening methods. The aggressive drill point penetrates concrete compressive strengths up to 4000 PSI while maintaining consistent pullout values and shear strength required by building codes. Essential for seismic tie-down installations, ledger board fastening, and temporary bracing applications in commercial construction and tenant improvement projects.

Strong-Point Cement Board Screws

Strong-Point Cement Board Screws provide specialized fastening for cement board, fiber-cement panels, and moisture-resistant underlayment applications in wet areas and exterior facade assemblies. The corrosion-resistant coating and specialized thread form prevent fastener head pop-through and fastener withdrawal common in cement board installation over time. Designed for use with cement board fastening specifications requiring fastener spacing and embedment depth compliance for warranty and building code adherence. The proprietary drill point geometry minimizes cracking of brittle substrate materials while achieving consistent spacing and alignment across large facade areas.

Strong-Point Outdoor Screws

Strong-Point Outdoor Screws in stainless steel or hot-dip galvanized finishes provide lasting structural fastening for exterior wood decking, pergolas, and fascia applications exposed to weathering and moisture cycling. Enhanced corrosion resistance formulations prevent white rust staining and structural degradation common with standard fasteners in coastal environments and wet climates. The designed fastening geometry accommodates wood shrinkage and expansion cycles while maintaining structural integrity across seasonal temperature and moisture variations. Ideal for deck construction, exterior trim, and architectural millwork applications requiring fastener visibility as a design element.

Strong-Point Drywall Screws

Strong-Point Drywall Screws deliver rapid, burr-free fastening of gypsum board to metal studs, wood framing, and resilience channel applications in commercial and residential interior construction. The bugle head geometry seats flush with drywall surface without dimpling or crushing the fragile gypsum core, achieving smooth finished surfaces suitable for taping and joint compound application. Fine-pitch thread design and aggressive drill point penetrate framing members smoothly while maintaining consistent fastener depth across full sheets. Essential for meeting acoustic and fire-rated assembly specifications while reducing installation labor and material waste in high-volume construction projects.

Personal Protective Equipment (PPE) for Construction

Protect your crew with South Coast Fasteners' comprehensive PPE selection for Construction environments.

Hard Hats

Hard hats with Class E electrical protection ratings safeguard construction workers from falling objects, low-overhead impacts, and electrical hazards common on active construction sites and elevated work platforms. The suspension system absorbs impact energy while maintaining comfort during extended wear throughout full shifts in hot, dusty construction environments. Chin straps prevent accidental dislodgment during climbing, elevated work, and equipment operation on commercial construction projects and scaffolding installation. ANSI Z89.1 Type I certification ensures compliance with OSHA regulations and construction site safety protocols across all general contractors and union construction operations.

Safety Glasses

Impact-resistant safety glasses protect construction workers from fastener fragments, wood splinters, and grinding debris generated during fastening operations and surface preparation work. The anti-fog coating maintains clear vision during temperature fluctuations and moisture exposure common in indoor construction renovation and outdoor weather-dependent project schedules. Wraparound designs provide peripheral protection while maintaining adequate side vision for safe operation around power tools, nail guns, and fastening equipment. UV protection and anti-scratch coating extend service life across extended outdoor sun exposure during roofing, deck construction, and exterior facade installation.

Safety Goggles

Safety goggles with indirect ventilation systems protect against chemical splashes, concrete dust, and particulate exposure during concrete cutting, grinding, and surface preparation operations. The flexible vinyl frame accommodates extended wear comfort while the sealed design prevents debris intrusion around eye perimeters during high-exertion construction activities. Anti-fog inner coating combined with external UV-protective lenses ensures clear vision during varied weather conditions on outdoor construction sites. ANSI Z87+ rating provides impact protection exceeding general safety eyewear standards for construction-specific hazard exposure.

General Purpose Gloves

General purpose construction gloves provide durable hand protection during fastener handling, material moving, and tool use without sacrificing dexterity required for precision work and fastening operations. Reinforced synthetic leather palms resist abrasion from rough building materials, concrete surfaces, and metal framing edges common throughout construction project assembly. Breathable cotton back reduces perspiration accumulation during physically demanding work while the knit cuff prevents debris intrusion during excavation and material handling. Cost-effective replacement frequency supports high-turnover construction labor environments where workers rotate through diverse project assignments.

Cut Resistant Gloves

Cut-resistant gloves with ANSI A3 ratings protect construction workers from sharp sheet metal edges, fastener points, and wire fragments encountered during commercial framing and metal stud assembly operations. Kevlar and other engineered fiber construction resist blade penetration while maintaining reasonable tool grip and tactile feedback for fastening precision work. The ergonomic wrist closure prevents material intrusion while the textured palm surface accommodates wet, oily, or damp fastening conditions common in commercial construction environments. Multiple sizing ensures proper fit across diverse construction crews, improving adoption rates and consistent personal protective equipment compliance.

Disposable Respirators

NIOSH N95-rated disposable respirators protect construction workers from silica dust, concrete particulates, and fastening operation byproducts during grinding, drilling, and cutting activities on active construction sites. The pre-formed cup design maintains seal integrity throughout extended work intervals while exhalation valves reduce heat and moisture buildup during high-exertion construction activities. Individual packaging prevents contamination during storage and transport in construction tool belts and site office locations. Single-use design eliminates cross-contamination concerns and cleaning protocols across multi-worker construction crews and subcontractor coordination.

Hi-Viz Clothing

High-visibility vests and apparel with retroreflective striping ensure construction workers remain visible to equipment operators, vehicle traffic, and cranes during daylight, dawn, and dusk work hours on active construction sites. The lightweight vest design accommodates layering and tool belt wear without compromising comfort during full-shift work in varied seasonal conditions. Mesh fabric options enable air circulation during warm weather construction work while heavier materials provide thermal protection during fall and winter project schedules. Class 2 certification meets ANSI standards for visibility at roadside construction zones and heavy equipment operating areas.

Safety Footwear

Composite-toe safety shoes provide puncture-resistant protection against nail strike-through and fastener injuries common on active construction sites and demolition environments. The shock-absorbing sole design reduces foot fatigue during extended standing and climbing inherent in construction work across multiple building levels and scaffolding systems. Slip-resistant tread patterns maintain stability on wet concrete, muddy foundations, and sloped roof surfaces encountered during varied construction project phases. Electrical hazard ratings provide protection in commercial electrical room fastening and low-voltage system installation work on large construction projects.

Earplugs

Foam earplugs rated NRR 28 to 30 protect construction worker hearing during nail gun operation, powder-actuated fastening, and pneumatic tool use in concrete drilling and surface preparation activities. Expandable foam design accommodates varied ear canal geometries while maintaining consistent noise attenuation across construction worker populations of different ages and body types. Bright color coding improves accountability and retrieval in construction site tool management protocols while reducing loss across multi-crew work sites. ANSI S3.19 certification ensures consistent noise reduction across the frequency spectrum of construction machinery and fastening equipment.

Earmuffs

Over-the-ear earmuffs with sealed cups deliver NRR 28 protection during concrete cutting, pneumatic fastening, and impact tool operations without the insertion complexity of foam earplugs. Soft vinyl-covered ear cushions accommodate prolonged wear comfort required during full-shift construction work while the folding design enables convenient removal and repositioning as work transitions between noisy and lower-noise tasks. Hard-hat compatibility supports dual-protective equipment requirements common on commercial construction sites with combined personal protective equipment mandates. Passive or electronic models accommodate communication needs while protecting against construction machinery noise hazards.

Face Shields

Clear polycarbonate face shields protect construction workers from fastener fragments, grinding sparks, and flying debris generated during metal stud cutting, welding preparation, and abrasive fastening surface preparation. The wide coverage area shields eyes, nose, and mouth regions during high-velocity fragment exposure common in mechanical fastening and fastener removal operations. Hard-hat compatible mounting systems enable rapid attachment and removal as construction workers transition between diverse work activities requiring varied protective equipment configurations. Anti-fog coating maintains visibility during temperature fluctuations inherent in construction site climates spanning indoor and outdoor environments.

Knee Protection

Protective knee pads and kneeling equipment reduce repetitive stress and impact injuries during kneeling fastening operations, concrete work, and low-level material positioning on construction sites. Gel-filled padding absorbs impact force while the durable outer shell resists abrasion from concrete, gravel, and rough construction site surfaces. Adjustable strap systems accommodate varied worker body types and kneeling durations while maintaining consistent positioning and protective coverage. Essential personal protective equipment for masons, concrete finishers, and construction crews performing extended low-level fastening and finishing operations.

Industrial Supplies for Construction

Keep operations running with the industrial supplies, hand tools, abrasives, and cutting tools Construction professionals rely on daily.

Adhesives and Tape

Construction-grade adhesives and tapes provide supplementary fastening and weatherproofing in applications where fasteners alone cannot ensure lasting structural integrity and water resistance. Double-sided construction tape expedites temporary positioning and holds fasteners in alignment during assembly operations before permanent fastening occurs. Weatherproof sealant tapes create gasket functions preventing water intrusion at fastener penetration points in roofing, deck, and exterior facade applications. Compliance with construction standards including IRC, IBC, and local building codes ensures adhesive selection meets structural and environmental exposure requirements.

Cable Ties

Heavy-duty cable ties organize electrical conduit, rebar restraint, and mechanical system piping while maintaining structural integrity across decades of building service life and environmental exposure. UV-stabilized nylon construction resists degradation from continuous outdoor solar exposure on exterior building facades and roof applications. Tensile strengths rated for structural tie-down applications exceed temporary bundling capacity while releasable designs enable future system modifications and building renovations. Bulk supply quantities support high-volume construction fastening where cable management represents significant material cost and labor requirements.

Wipes/Towels/Hand Wash

Industrial-strength cleaning towels and hand wash products remove concrete dust, adhesive residue, and heavy soiling from construction worker hands and fastening equipment between work intervals. Citrus-based formulations cut through stubborn construction debris without harsh chemical irritation common with petroleum-based solvents during extended daily use. Spill-absorption towels manage concrete slurry, epoxy, and fastening fluid spills on active construction floors while maintaining safe walking surfaces and equipment operation. NSF-approved and biodegradable formulations support construction site environmental compliance and waste management regulatory requirements.

Polyfilm and Contractor Bags

Heavy-gauge polyfilm barriers protect fastening areas and completed construction from dust and weather contamination during ongoing site activities and construction sequencing. Large contractor bags contain fastening debris, scrap materials, and construction waste while facilitating site cleanup and material separation for recycling programs. Flame-retardant rated polyfilm materials comply with construction fire safety codes when used as temporary enclosures and dust containment barriers. Bulk quantities support continuous construction workflow while durable materials withstand multiple handling cycles across construction site logistics.

Concrete Drill Bits

Carbide-tipped concrete drill bits penetrate hardened concrete, masonry, and cinder block with precision required for fastener pilot hole drilling and anchor installation in structural retrofitting and foundation fastening. SDS-Plus shank compatibility enables quick-change operation on pneumatic and corded concrete drilling equipment common in commercial construction fastening operations. Flute geometry designed for concrete prevents binding and excessive heat generation during deep drilling required for foundation-penetrating fasteners and seismic anchor installation. Metric and imperial sizing accommodates diverse fastener specifications across residential, commercial, and industrial construction applications.

Metal Drill Bits

High-speed steel metal drill bits enable precise pilot hole drilling through light-gauge steel framing, metal deck, and structural steel applications in commercial building construction and metal stud system fastening. The premium split-point geometry eliminates center walking while reducing feed pressure requirements during CNC-programmed drilling of repetitive fastener patterns in metal building components. Bulk packaging in fractional and metric sizes supports diverse fastener specifications across varied construction project specifications and building system requirements. Consistent dimensional tolerance ensures pilot hole accuracy reducing fastener installation time and minimizing material waste across high-volume construction fastening.

Hammers

Heavy-duty striking hammers deliver impact force for powder-actuated fastening, fastener setting, and material adjustment during construction assembly operations and on-site fastening modifications. Fiberglass and metal handles absorb shock loads while distributing impact force safely away from worker hands during fastener installation and material positioning. Slip-resistant grip surfaces maintain control during extended use in wet and dusty construction site environments common across building phases. Multiple weight options accommodate diverse fastening applications from light finish fastening to heavy structural component positioning and alignment.

Tape Measures

Durable tape measures enable accurate spacing and fastener location marking essential for structural alignment, code compliance, and architectural dimension accuracy across commercial construction projects. The self-locking feature maintains measurement accuracy during extended holds and allows one-handed operation during positioning and marking of fastener locations on vertical surfaces and overhead applications. Reinforced blade design resists bending and kinking from repeated extension and retraction during intensive daily construction fastening operations. Impact-resistant casings withstand tool belt wear and accidental drops while maintaining internal mechanism reliability across extended construction project duration.

Utility Knives

Precision utility knives facilitate fastening surface preparation, material trimming, and fastener head removal without fastener damage in construction renovation and selective demolition operations. The quick-change blade system enables rapid transitions between fresh sharp blades and removes dull blades safely without hand contact with sharp edges. Ergonomic handle design reduces fatigue during repetitive cutting and material preparation inherent in high-volume construction fastening and assembly work. Carbide and ceramic blade options provide extended cutting life for synthetic materials, gypsum board, and fastening preparation tasks common in interior and exterior construction applications.

Adjustable Wrenches

Heavy-duty adjustable wrenches provide flexible fastening capability for varied fastener sizes reducing tool kit weight and volume essential for construction workers managing multiple tool kits across active projects. The chrome-vanadium steel construction delivers strength required for high-torque fastening applications in structural connections and mechanical system assembly. Smooth jaw adjustment enables rapid fastener size changes while the ergonomic handle accommodates extended tool use without hand cramping or fatigue. Sizes ranging from 6-inch to 18-inch accommodate diverse fastener specifications across commercial construction applications and mechanical system installation.

USA Socket Master Sets

Comprehensive socket sets with drive sizes accommodating construction fastening from small hardware fasteners to large structural bolting operations in building assembly and mechanical system installation. Impact-rated sockets withstand power tool torque loads and manual force application required for rusted fasteners and heavy structural fastening common in construction renovation and demolition work. Quick-release ratchet compatibility enables rapid fastener engagement while specialized deep-well sockets access fasteners in structural pockets and mechanical equipment tight spaces. Organized carrying systems maintain tool accountability across multi-crew construction sites while protecting socket investment from loss and damage.

Why Choose South Coast Fasteners for Construction Supply?

South Coast Fasteners supplies structural grades, specialty anchors, and strut systems alongside PPE and industrial supplies that meet building codes and engineer specifications. Our expertise spans residential and commercial construction with single-source availability of bolts, nuts, washers, and anchors in certified structural grades.

Shop Construction Products Online at South Coast Fasteners

Shop our full range of construction fasteners, PPE, and industrial supplies online at South Coast Fasteners and contact us anytime with any questions or for help placing your order.