Construction Fasteners, PPE & Industrial Supplies | South Coast Fasteners

South Coast Fasteners supplies the structural fasteners, anchoring systems, PPE, and industrial supplies that general contractors, steel fabricators, framers, and subcontractors require for framing, concrete, steel, and foundation work. Based in Anaheim, California, with 24 USA distribution locations and will-call available at checkout for local pickup, we deliver the high-strength hardware and fast turnaround active job sites depend on. Shop all construction products online at South Coast Fasteners and reach out for help making an online purchase or for any questions.

Fasteners for the Construction Industry

South Coast Fasteners stocks the complete range of fasteners construction demands, from structural-grade hardware to concrete anchors engineered for the most tough loads.

Structural Bolts

Structural bolts in A325 and A490 grades carry the high tensile and shear loads of steel-to-steel connections in building frames, bridges, and heavy structures. The heavy hex head and matched nut and washer assemblies meet the requirements of structural steel codes. Hot-dip galvanized finishes protect connections exposed to weather over the life of the structure. Proper grade and assembly are essential to safe, code-compliant steel erection.

Hex Cap Screws

Grade 8 hex cap screws deliver high strength for equipment anchoring, heavy bracketry, and load-bearing connections on the job site. Grade 5 hex cap screws handle general framing, blocking, and assembly work. Coarse and fine thread options and a wide diameter range cover light to heavy construction fastening. Plated and galvanized finishes resist corrosion in exterior and below-grade applications.

Lag Screws

Lag screws provide heavy holding power in wood framing, ledger boards, and timber connections where through-bolting is impractical. The coarse threads bite deep into structural lumber for load transfer. Hot-dip galvanized and stainless options resist corrosion in exterior and treated-lumber applications. A full size range covers deck, framing, and heavy timber work.

Carriage Bolts

Carriage bolts secure wood-to-wood and wood-to-metal connections with a smooth domed head and square neck that locks against rotation. The clean head finish suits exposed framing, railings, and timber structures. Galvanized and stainless finishes hold up to exterior and ground-contact exposure. Common in deck framing, fencing, and structural timber assembly.

Concrete Screw Anchors

Concrete screw anchors deliver fast, removable fastening into concrete, block, and brick without the spacing complexity of expansion anchors. The hardened threads cut directly into the predrilled hole for immediate load capacity. Hex and flat head styles cover plate, fixture, and equipment mounting. Coated and stainless options resist corrosion in exterior and damp environments.

Wedge Anchors

Wedge anchors provide permanent, high-strength fastening into solid concrete for structural connections, equipment pads, and sill plate anchoring. The mechanical expansion clip develops hold across varied concrete strengths and embedment depths. Zinc-plated and stainless versions match the exposure environment. Load ratings cover light fixtures through heavy structural and seismic connections.

Sleeve and Drop-In Anchors

Sleeve and drop-in anchors expand existing anchoring options for fixtures, railings, and equipment in concrete and masonry. Sleeve anchors set in a single step for fast medium-duty fastening, while drop-in anchors provide flush, machine-thread anchoring for removable connections. Both develop hold in solid base material. A range of sizes covers light to heavy mounting.

Toggle and Hollow Wall Anchors

Toggle bolts and hollow wall anchors mount fixtures, fittings, and equipment in drywall, block, and hollow substrates where solid anchoring is unavailable. The spring-wing or expanding body spreads load behind the wall for hold. A range of sizes covers light fixtures through heavier suspended loads. Plated finishes resist corrosion in interior applications.

Threaded Rod and Anchor Bolts

Threaded rod and anchor bolts provide continuous and cast-in-place anchoring for structural connections, hangers, and equipment support. Continuous threading allows field cut-to-length customization for hangers and suspended systems. High-strength grades and galvanized finishes meet structural and exterior requirements. L-shaped and headed anchor bolts set into concrete for sill plate and column base connections.

Self-Drilling Screws

Self-drilling screws eliminate pre-drilling in metal framing, decking, and light steel connections, speeding installation on active job sites. The integrated drill point pierces steel while threads engage in one operation. Corrosion-resistant coatings protect fasteners in exterior and damp construction environments. A range of points and lengths covers light gauge through structural steel.

Wood and Self-Tapping Screws

Self-tapping and wood screws drive fast and hold tight in framing, sheathing, decking, and finish work. Hardened threads resist stripping in dimensional lumber and engineered wood. Coated and stainless options protect against corrosion in exterior and treated-lumber applications. Multiple head and drive styles cover structural through finish fastening.

Heavy Hex Nuts and Lock Nuts

Heavy hex nuts match structural bolt assemblies and carry the loads of steel connections. Nylon insert locknuts resist vibration-induced loosening in equipment, railing, and dynamic-load connections. Galvanized and stainless finishes match the bolt and the environment. All-metal locknuts serve high-temperature and heavy structural applications.

Structural and Flat Washers

Hardened structural washers distribute the high clamp loads of A325 and A490 bolt assemblies and protect steel surfaces. Flat washers spread load and prevent fastener pull-through in wood and sheet applications. Lock washers add tension that resists loosening under vibration. Galvanized and stainless options match exterior and structural requirements.

Strut Channel Systems

Strut channel and fittings build modular support for conduit, pipe, ductwork, and equipment without welding or drilling. The continuous slot accepts nuts, bolts, and fittings for fast field assembly and reconfiguration. Galvanized and stainless channel matches interior and exterior exposure. Channel nuts, brackets, and clamps complete the support system.

Strong-Point Products for Construction

South Coast Fasteners' exclusive Strong-Point screw line is engineered for the speed and reliability construction work demands.

Strong-Point Drywall Screws

Strong-Point drywall screws drive fast and seat clean in gypsum board over wood and metal framing. The bugle head sinks below the surface without tearing paper for a smooth finish-ready result. Sharp points and fine or coarse threads match wood and steel stud applications. Phosphate coating resists corrosion through finishing and over time.

Strong-Point Self-Drilling Screws

Strong-Point self-drilling screws streamline metal framing, decking, and light steel connections without pre-drilling delays. The hardened drill point penetrates steel consistently while the threads engage in a single operation. Rapid installation cuts labor on high-volume framing and sheathing work. The built-in point removes a separate drilling step and tool change.

Strong-Point Cement Board Screws

Strong-Point cement board screws fasten backer board to wood and metal framing with corrosion-resistant coatings built for wet-area construction. The specialized head countersinks cleanly without cracking the board. The thread form develops strong hold in cement board and framing. Designed for tile substrate, flooring, and wet-area assemblies.

Strong-Point Needle Point Screws

Strong-Point needle point screws fasten thin gauge metal and trim cleanly without deforming the material. The precision point penetrates at lower driving torque to protect light material and finish surfaces. Consistent quality supports repeatable results across high-volume work. Good for light steel framing, trim, and finish fastening.

Personal Protective Equipment (PPE) for Construction

Protect your crew with South Coast Fasteners' full PPE selection built for the job site.

Hard Hats

Hard hats protect against falling objects, overhead impacts, and electrical hazards across active construction sites. The suspension system absorbs impact energy while maintaining comfort through long shifts. Class E ratings add protection in electrical work environments. ANSI Z89.1 certification ensures compliance with OSHA job site requirements.

Cut Resistant Gloves

Cut resistant gloves protect against sharp metal edges, rebar, and material handling hazards during framing, steel, and concrete work. Engineered fiber construction maintains dexterity for fastener installation and tool use. Multiple ANSI cut levels match the hazard from light handling to heavy steel. Coated palms add grip in wet and dusty conditions.

General Purpose Gloves

General purpose gloves handle everyday material handling, framing, and site work where grip and durability matter. Coated palms improve control on lumber, hardware, and tools. Breathable backs keep hands comfortable through long shifts. A cost-choice for high-turnover crew use.

Mechanics and Impact Gloves

Mechanics and impact gloves add back-of-hand protection for demolition, equipment work, and heavy material handling. Reinforced padding absorbs impact while synthetic palms resist abrasion. The secure fit maintains dexterity for tool and fastener work. Built for the heavy demands of the job site.

Safety Glasses

Impact-resistant safety glasses shield eyes from debris, dust, and fragments during cutting, drilling, and demolition. Anti-fog coatings maintain clear vision across temperature and humidity changes. Wraparound designs add peripheral protection and meet ANSI Z87.1. Tinted lenses reduce glare during outdoor work.

Disposable Respirators

NIOSH N95 disposable respirators protect against concrete dust, silica, and airborne particulates during cutting, grinding, and demolition. The pre-formed design maintains seal integrity through extended wear. Exhalation valves reduce heat and moisture buildup on the job. Individual packaging keeps respirators clean in site storage.

Earplugs

Foam earplugs rated NRR 28 to 30 protect hearing from power tools, compressors, and heavy equipment noise. Expandable foam accommodates varied ear canals for a consistent seal. Corded and uncorded styles suit different work environments. ANSI S3.19 certification ensures noise reduction.

Safety Footwear

Composite-toe and steel-toe safety footwear protect against falling objects, fastener punctures, and sharp material on the job site. Slip-resistant soles maintain stability on uneven, wet, and debris-covered surfaces. Puncture-resistant plates guard against nails and protruding fasteners. Electrical hazard ratings add protection in live-current environments.

High-Visibility Apparel

High-visibility vests and shirts keep crews seen around equipment, traffic, and active work zones. ANSI-rated reflective striping and fluorescent fabric meet job site visibility requirements. Breathable, durable construction holds up to daily wear in all conditions. A range of classes matches roadway and site exposure levels.

Knee Protection

Knee protection reduces strain during flooring, concrete, and low-level fastening work. Gel and foam padding absorbs impact while durable shells resist abrasion on concrete and rough surfaces. Adjustable straps hold position through repeated kneeling and movement. Essential for crews performing extended floor-level work.

Industrial Supplies for Construction

Keep the job site running with the industrial supplies, hand tools, abrasives, and cutting tools construction crews rely on daily.

Adhesives and Tape

Adhesives and tape provide construction bonding, sealing, and marking across framing, finishing, and concrete work. Construction adhesives bond subfloor, panel, and trim assemblies for added strength and squeak prevention. Specialty tapes handle masking, seaming, and moisture barriers. Sealants close out joints and fastener penetrations against air and water.

Cable Ties

Cable ties bundle and route wiring, conduit, and temporary site materials while resisting UV and weather exposure. UV-stabilized nylon withstands outdoor job site conditions. Releasable designs allow rework without cutting. Tensile ratings cover light bundling through heavy restraint.

Wipes, Towels, and Hand Wash

Industrial-strength cleaning wipes remove adhesive, concrete residue, and grime from hands, tools, and surfaces. Heavy-duty formulations cut through construction contaminants without harsh solvents. Durable, lint-free material holds up to rough job site cleanup. Bulk packaging supports crew-wide use.

Metal Drill Bits

High-speed steel metal drill bits penetrate structural steel, brackets, and metal framing for fastener pilot holes. Split-point geometry prevents walking for accurate positioning. Cobalt and coated options extend life in hardened and stainless steel. Fractional and metric sizing covers construction fastener specifications.

Concrete Drill Bits

Carbide-tipped concrete drill bits bore clean, accurate holes for anchors in concrete, block, and masonry. SDS-Plus shanks enable fast operation on rotary hammer drills. Specialized flutes clear dust for consistent hole quality and anchor performance. A full size range matches wedge, sleeve, and screw anchor specifications.

Abrasives

Abrasives handle cutting, grinding, and surface prep across steel, concrete, and masonry. Cut-off wheels, grinding wheels, and flap discs cover metal cutting through weld and edge finishing. Masonry wheels and diamond blades tackle concrete and block. Consistent performance and durable construction hold up to heavy site use.

Adjustable Wrenches

Heavy-duty adjustable wrenches handle varied fastener and fitting sizes, reducing tool kit complexity on site. Chrome-vanadium construction delivers strength for high-torque structural fastening. Smooth jaw adjustment speeds size changes. Multiple lengths cover light fitting through heavy bolt work.

Tape Measures

Durable tape measures support accurate layout and fastener spacing across framing and finish work. The self-locking blade holds measurements during extended layout. Impact-resistant casings withstand drops and job site wear. A range of lengths covers detail work through full structure layout.

Utility Knives

Precision utility knives handle insulation, drywall, packaging, and material prep across the job site. Quick-change blade systems keep a sharp edge ready for clean cuts. Retractable designs improve safety in storage and transport. Replacement blades cover light trim through heavy material.

Contractor Trash Bags

Heavy-duty contractor trash bags handle demolition debris, construction waste, and job site cleanup without tearing. Thick puncture-resistant material holds drywall, wood, and sharp debris. Large capacities reduce trips during cleanup and turnover. Built for the demands of active construction sites.

Why Choose South Coast Fasteners for Construction Supply?

South Coast Fasteners supplies full construction fastening solutions, PPE, and industrial supplies including structural bolts, concrete anchors, and screws from a single source. Our inventory spans steel erection, framing, concrete, and finish work with the structural grades, galvanized finishes, and anchoring systems the job site demands. Single-source availability of fasteners, PPE, hand tools, abrasives, and cutting tools keeps procurement simple and crews supplied. Consistent quality and fast turnaround keep projects moving on schedule.

Shop Construction Products Online at South Coast Fasteners

Shop our full range of construction fasteners, PPE, and industrial supplies online at South Coast Fasteners and contact us anytime with any questions or for help placing your order.